AMMONIA REMOVAL: NITRIFICATION

Applications

Ammonia treatment can be difficult and complicated. The the LemTec™ Biological Treatment Process simplifies ammonia treatment, reliably and consistently removing Ammonia Nitrogen (NH3-N) using several methods. Most ammonia removal occurs in the complete mix cell through the optimization of aeration and mixing in that zone. Additional aeration (beyond that used solely for BOD removal) is supplied to meet ammonia removal requirements. When aeration is not sufficient to meet limits, supplemental mixing is added for complete treatment. Ammonia removal depends on temperature, in cold climates, requiring a fully covered system is employed to maintain the higher temperatures needed for nitrification. Effluent from the covered lagoon treatment process alone contains less than 10 mg/L of ammonia nitrogen (NH3-N). For lower effluent requirements, the Lemna Polishing Reactor (LPR) is included. Using fixed media, the LPR can meet ammonia limits of less than 1 mg/L.

Integrating Lagoon Technologies to Solve Every Treatment Challenge from Influent to Effluent

Ammonia treatment can be difficult and complicated. The LemTec™ Biological Treatment Process simplifies ammonia treatment, reliably and consistently removing Ammonia Nitrogen (NH3-N) using several methods. Most ammonia removal occurs in the complete mix cell through the optimization of aeration and mixing in that zone. Additional aeration (beyond that used solely for BOD removal) is supplied to meet ammonia removal requirements. When aeration is not sufficient to meet limits, supplemental mixing is added for complete treatment. Ammonia removal depends on temperature and in cold climates a fully covered system is used to maintain the higher temperatures needed for nitrification. Effluent from the covered lagoon treatment process alone contains less than 10 mg/L of ammonia nitrogen (NH3-N). For lower effluent requirements, the Lemna Polishing Reactor (LPR) is included. Using fixed media, the LPR can meet ammonia limits of less than 1 mg/L.

Nitrification

Ammonia-nitrogen (NH3) is converted to nitrate-nitrogen (NO3) by an aerobic biological process called nitrification. In the LemTec™ process, nitrification occurs in the Complete Mix cell of the aerated lagoon and in the Lemna Polishing Reactor (LPR). The complete mix zone of the LemTec™ Biological Treatment Process (LBTP) is an aerated, aggressively mixed cell that establishes an environment suitable for the rapid removal of BOD5 by heterotrophic bacteria. In addition to BOD5 removal, ammonia is also removed by heterotrophic bacteria present in the complete mix cell.  Ammonia is utilized by the bacteria to support its nitrogen requirement for growth. Also, nitrifier growth will occur in the complete mix cell resulting in additional (and significant) ammonia reduction.

In the LemTec™ process, nitrification primarily occurs in the LPR. The LPR consists of submerged, attached-growth media modules, used for maintaining an adequate population of bacteria.  Each module is comprised of plastic cross-flow media contained in a stainless steel support structure.  Aeration is provided by rack-mounted coarse-bubble diffusers located under the media, which evenly distribute the air and shear coarse-bubbles into very fine bubbles.  This simple yet effective technology is ideal for supplemental BOD and ammonia-nitrogen (NH3-N) polishing. Using well proven attached-growth media technology, the LPR enhances the growth of nitrification bacteria to encourage conversion of ammonia to nitrates and nitrites in a highly aerobic environment. 

Expertise as a leader in this industry for 30+ years, an arsenal of cutting-edge technologies and a groundbreaking approach set LET apart by delivering optimized solutions for wastewater applications including Nitrification to meet clients' objectives efficiently and cost-effectively. We maximize LET's innovative technologies as stand-alone solutions or use the Advanced Integrated Lagoon Technologies (AILT) approach to design and create the best process with technologies integrated as components that successfully meet every challenge from influent to effluent.  

EMAIL: info@lemna.com

PHONE: (612) 253-2000

CORPORATE ADDRESS: 4215 White Bear Parkway, Suite 200, Vadnais Heights, MN 55110

  • Facebook
  • YouTube
  • LinkedIn Social Icon

Copyright © 2019 Lemna Environmental Technologies, Inc. All Rights Reserved